Linux bonding and Cisco Etherchannel

I see smilieid="48" border="0" alt="" />x87:ax:5x
/sbin/ip addr add xxx.xxx.xxx.x/24 brd + dev bond0
/sbin/ip link set dev bond0 up
/sbin/ifenslave bond0 eth0 eth1
/sbin/route add -net 0.0.0.0 netmask 0.0.0.0 gw xxx.xxx.xxx.x
/etc/init.d/bab start
# /opt/CA/BrightStorARCserve/bin/startgui
3) This Linux server connected to>

---

channel-group 1 是在vlan2里的吗
这个和Example 2里的
On the switch:
# set up a trunk>

---

我记得有个配置
(config)#int g4/1
(config-if)#....
(config-if)#switchport mode trunk
(config-if)#....
(config-if)#channel-group 1 mode>

---

TAG标签 : config-if bond0 dev set 0.0.0.0 trunk add up mode