发一个取M/T路由器信息的script,要求加精

在各位购买的JUNIPER M/T系列骨干路由器出了故障以后，如果不是配置问题，则需要escalate到JTAC[JUNIPER TECHNICAL ASSISTANCE CENTER]来处理，JTAC工程师在接收到CASE以后，一般会要求提供各种软硬件信息，下面这个SCRIPT就是用来收集这样的信息的，这样可以省得大家敲命令了  
# ------------ what's showtac
# showtac is a script to collect Juniper router current status information
# the output is saved in a log file under the log directory

# the log file name reflects the time the log is taken

# ------------ version info ---------------

# this is version 6

# differences between version 5
# 1. added M320 commands eyw

# differences between version 4
# 1. added T640/T320/M7i/M10i commands
# 2. added IS-IS commands
# 3. added additional statistics gathering commands

# differences between version

# 1. added m40e commands

# differences between version
# 1. added 'show chassis environment routing-engine' for M160 RRW

# differences between version 1
# 1. detailed installation steps

# differences between prior versions r
# 1. added comments>

---

TAG标签 : 要求 信息 路由器 一个 version added 1. between differences