注册
个人空间
a.If you are using a tape device instead of an optical device, verify that the tape unit is varied on and allocated to your system.
b.If you are using a device that is enabled as an alternate installation device, you need to load the Licensed Internal Code media in your primary device and your installation media in your alternate installation device. Your installation will fail if both media do not contain the same release level of Licensed Internal Code. For more information, see Alternate installation device.
6.Use the control panel to set the mode to Normal.
For logical partitions only
Use the virtual control panel (Work with Partition Status display on your primary partition or partition status on systems with HMC) to set the mode to Normal. Also, make sure that you have already selected the alternate IPL device before performing the initial program load (IPL) in step 8.
Notes:
a.If you have not already set up an alternate IPL device for a logical partition, refer to online help information in IBM® iSeries Navigator.
b.If you are using another method to select an alternate IPL device in a logical partition, refer to the topic Overview: Alternate installation device.
7.If you have not previously performed an IPL either to perform the tasks to allocate additional storage for the V5R3 Licensed Internal Code (required) or to change the disk configuration (optional), you must do this IPL now before you power down the server or logical partition.
Note: If you are not sure that additional space for the Licensed Internal Code has been allocated, follow the steps in Required: Allocating additional space for Licensed Internal Code. If additional space has been allocated, you receive the message Allocating additional space is not necessary.
| 论坛热门帖子: | [lch203] 写得蛮好的linux学习笔记(10-21) [黑马制造] 学习java的30个目标(10-19) [笑傲股林] 做测试半年了，有点迷茫，应该再学些什么提高自己的测试水平和测试能力呢？(10-19) [udp8589] 大家用google的来吱一声? 用百度的~~也来报道下?(10-18) [沂偌掳兆] 本人总结的一些认为C++比较经典的书籍，希望对大家有用(10-18) |
| TAG标签: | 回复 升级 安装 #61607 自动 需要 步骤 virtualopticaldevice |
