注册
个人空间
partitioning of the drive. You can setup the partitions/slices manually or have
the install do an auto layout. I would suggest doing a auto layout and then
selecting the option to modify the setup. The following is a suggested setup
for a 1gb hard drive with only Solaris on the drive.
s0 root 35mb (minimum)
s1 swap 2x your ram (4x if < 32mb of ram)
s2 backup (do not change this number)
s3 var ~1/3 of the remainder of the drive
s4 usr ~1/3 of the remainder of the drive
s5 opt ~1/3 of the remainder of the drive
s6 N/A
*
This setup does not have a '/usr/openwin' or an '/export/home' as these are not
required for the normal stand-a-lone install of Solaris x86.
The install program will request conformation for the layout you have selected
and will give you a warning if you are installing on any drive but the boot
drive. You will then get a message asking if you if you would like to 'auto
reboot' at the end of install. Answer this question 'no'. Some x86 systems
will not do a complete/correct reboot from a software reboot signal and may give
you some problems with your hard drive install of Solaris. Try doing an 'init
6' or 'reboot' after you know your system is fully up and functional to see if
you may have this problem . NOTE: If you need to do a remote boot of the
Solaris x86 system, this may be a problem.
At the end of the install, and if you are using a driver update, you will be
asked to insert the distribution floppy into the floppy drive. If there are
more than one distribution floppy, you will be asked to insert the next one when
| 论坛热门帖子: | [lch203] 写得蛮好的linux学习笔记(10-21) [黑马制造] 学习java的30个目标(10-19) [笑傲股林] 做测试半年了，有点迷茫，应该再学些什么提高自己的测试水平和测试能力呢？(10-19) [udp8589] 大家用google的来吱一声? 用百度的~~也来报道下?(10-18) [沂偌掳兆] 本人总结的一些认为C++比较经典的书籍，希望对大家有用(10-18) |
| TAG标签: | 学者 还是 对于 但是 文章 虽然 一点 关于 回复 thesystemgoesto |
