注册
个人空间
1) Your SCSI controller is not on the hardware computability list. Solaris
supports most of the popular SCSI controllers. Most of the ones we do not
support are proprietary cards for special CDROM drives.
2) The driver for your SCSI controller did not get loaded. This usually means
that you have not setup the controller as per the 'x86 Device Configuration
Guide' or that you are having some conflicts with the IRQ or I/O address.
3) The termination scheme is not correct in your system. Remember, you must
terminate the ends of the SCSI bus. If you have only internal devices, have the
termination set on the controller and the last device in line. If you have both
internal and external devices, only terminate the last item on the external
chain and the last item on the internal chain.
4) If you are using an APA-348 (Mini SCSI to Parallel port adapter), remember
that one of the SCSI devices must supply term power. Try setting up this device
under DOS first. This will tell you if you have the correct settings on the
adapter and your SCSI devices.
"After I pick either Interactive or Jump-start, the system goes to the pipe
symbol and just spins"
1) This usually means that the install software is attempting to read from the
CDROM and is having problems.
2) If you are trying to use an E/IDE CDROM drive, see if the CDROM is on the
secondary controller and if so, move it to the primary controller as slave. If
you already have two hard drives, try moving the slave drive to the secondary
controller as a master and the CDROM drive to the primary as slave.
3) Make sure that your CDROM drive is NOT on a controller from your sound card
| 论坛热门帖子: | [lch203] 写得蛮好的linux学习笔记(10-21) [黑马制造] 学习java的30个目标(10-19) [笑傲股林] 做测试半年了，有点迷茫，应该再学些什么提高自己的测试水平和测试能力呢？(10-19) [udp8589] 大家用google的来吱一声? 用百度的~~也来报道下?(10-18) [沂偌掳兆] 本人总结的一些认为C++比较经典的书籍，希望对大家有用(10-18) |
| TAG标签: | 学者 还是 对于 但是 文章 虽然 一点 关于 回复 thesystemgoesto |
