注册
个人空间
or from its own controller. The only sound card controller Solaris supports is
the Sound Blaster II/SCSI card (as of DU4 of Solaris 2.5/2.5.1).
"After I pick either Interactive or Jump-start, the system goes to the pipe
symbol, spins for a time and then the screen goes blank"
1) Check the video card and make sure that it is on the compatibility list.
2) Go into your system BIOS and check for 'video shadow ram'. If this is on,
turn it off, if it is off, turn it on.
3) Check your video card to see if it is using IRQ-9 for some reason. Solaris
and most of today's software do not use an IRQ for the video card and this can
be disabled.
4) Usually, the Specialty cards will display this problem. The Diamond Viper,
Matrix Millennium are two examples. If you have one of these, try exchanging it
for a standard VGA card and if the install works then reinstall your video card
and run 'kdmconfig' to get your board setup in your system.
"After I pick either Interactive or Jump-start, the system goes to the pipe
symbol and then I get page after page of 'Panic/Page Fault' messages and the
system reboots"
1) If you have added ram memory above the memory your system came with, try
removing the new ram memory. Solaris is very fussy about memory and on some
systems, it has to be the same in all banks.
2) A bad read from the CDROM can cause this also. The quick test is to slow the
transfer of data from the CDROM down. For E/IDE, turn off all Cache memory
under the BIOS setup. For SCSI, lower the transfer rate for the CDROM to the
slowest setting available. Once you have Solaris installed you can return the
| 论坛热门帖子: | [lch203] 写得蛮好的linux学习笔记(10-21) [黑马制造] 学习java的30个目标(10-19) [笑傲股林] 做测试半年了，有点迷茫，应该再学些什么提高自己的测试水平和测试能力呢？(10-19) [udp8589] 大家用google的来吱一声? 用百度的~~也来报道下?(10-18) [沂偌掳兆] 本人总结的一些认为C++比较经典的书籍，希望对大家有用(10-18) |
| TAG标签: | 学者 还是 对于 但是 文章 虽然 一点 关于 回复 thesystemgoesto |
