注册
个人空间
Instead of using the RAID 0 setting in the motherboard's BIOS, I opted to utilize all four IDE channels separately so there would be no chance of master/slave contention. The hard drive, DVD, and CDRW drives were each masters on their own IDE controllers. The machine was set to boot from the primary (hard drive) or secondary (DVD drive) device.
The one bit of hardware I wished for in this machine was a PCI PC Weasel card. I could have plugged the x86 hardware into the serial terminal server with all of my SPARC hardware and avoided sitting in the machine room while I performed the interactive install. If this had been something other than a one-off test install, I would have set up an x86 jumpstart image on my SPARC jumpstart server. Using jumpstart and/or a flash image also would have automated much of the work I ended up doing at the console. As it was, the x86 interactive install was fairly straightforward and looked similar to its SPARC counterpart.
Booting and Selecting the Language
The first step was to boot off of the CDROM and pick my language and locale:
I inserted the Software 1 of 2 CD into the DVD drive and powered on the system.
The system scanned for attached devices, and I hit F2 to accept the devices it found.
The next screen prompted me to choose the device to boot from. I selected the second device, the CDROM, and hit F2 to continue.
I then chose the type of installation, the first choice, Solaris OS interactive installation.
I selected choice 0, English, as my language.
I selected choice 0, English (C - 7-bit ASCII) as my locale.
I was then presented with the Solaris OS installation splash screen and hit F2 to continue to the next step.
| 论坛热门帖子: | [lch203] 写得蛮好的linux学习笔记(10-21) [黑马制造] 学习java的30个目标(10-19) [笑傲股林] 做测试半年了，有点迷茫，应该再学些什么提高自己的测试水平和测试能力呢？(10-19) [udp8589] 大家用google的来吱一声? 用百度的~~也来报道下?(10-18) [沂偌掳兆] 本人总结的一些认为C++比较经典的书籍，希望对大家有用(10-18) |
| TAG标签: | 体验 用户 安装 选择 系统 配置 屏幕 设置 磁盘 F2 硬件 |
