注册
个人空间
For x86 platforms, it needs to disable PnP OS or ACPI in BIOS setting to avoid incorrect IRQ assignment problem in Solaris x86. You also should assign IRQs to all devices on board in BIOS setting even if Solaris doesn't use them.
1. pctc driver for 3COM 3C589 PCMCIA cards
This is an alternative of Solaris pcelx driver which did not work with E version of 589 cards. But now a work around is known for pcelx, that is creating /kernel/drv/pcelx.conf file that includes following line.
force-8bit=1;
If you are interrested in a source code, down load below.
Tested OS Version: Solaris8 10/00 x86
Tested Hardware: EtherLink III 3C589C, EtherLink III 3C589D, Megahertz 3C589ET
Source file with x86 binary pctc-0.8.4b.tar.gz (beta test version)
Hot plug is not supported.
2. sfe driver for DP83815 and SiS900 fast ethernet chips
Tested OS version: Solaris8 10/00 x86, Solaris9 12/02 x86, Solaris9 sparc
Tested chips (PCI card product):
DP83815CVNG (Netgear FA311)
DP83815 (HP Pavilion ZE4100, thank to Ben)
DP83815DVNG (NetGear FA311 on sparc, thank to Peter & www.itserv.de)
DP83815 (NetGear FA312 in a Dell PowerEdge 1300, dual 500 MHz cpu's, thank to fred)
SiS900 (Melco BUFFALO LYG-PCI-TXC)
SiS900-core in SiS630ET chip set (thank to Rahul)
SiS900-core in SiS730 chip set (thank to Sytse)
SiS900-core in SiS963 south bridge of SiS648 chip set (thank to Matthias)
It likely work with DP83815 based Netgear FA312 and I-O DATA ET100-PCI-L, but WOL is not supported.
It will work with DP83816 but isn't tested yet.
sfe-1.0.0 or before may panic the system under heavy ethernet traffic. Please use the latest revison.
Source file with x86 binary: sfe-1.0.4.tar.gz
3. rh driver for VIA Rhine family fast ethernet chips
| 论坛热门帖子: | [lch203] 写得蛮好的linux学习笔记(10-21) [黑马制造] 学习java的30个目标(10-19) [笑傲股林] 做测试半年了，有点迷茫，应该再学些什么提高自己的测试水平和测试能力呢？(10-19) [udp8589] 大家用google的来吱一声? 用百度的~~也来报道下?(10-18) [沂偌掳兆] 本人总结的一些认为C++比较经典的书籍，希望对大家有用(10-18) |
| TAG标签: | 安装 成功 文档 网卡 回复 可以 启动 驱动 Testedchips |
